MENU

Cathodic Protection

32# Hi-Potential Magnesium Anode

32 Lb Hi-Potential Magnesium Anode: this anode is packaged with backfill and a 50' #12 THHN Red Solid Lead Wire. 

Add to RFQ

Handy Cap IP - 20 PER CASE

Handy Cap IP is a 4" x 4" prefabricated assembly designed to provide quick, field-applied corrosion protection to anode and test lead wire welds on metal pipe and tanks. This economical product is ideal for use in limited access applications. The design of Handy Cap IP makes use of innovative Tapecoat Gray Adhesive technology with an integrated primer. The integration of a primer in Tapecoat Gray makes field application of Handy Cap IP easier and more economical.

Price: 
$92.00

Handy Cap XL IP - 10 PER CASE

Handy Cap XL IP is a 5" x 5" Exothermic Weld Grounding Connection prefabricated assembly designed to provide quick, field-applied corrosion protection to anode and test lead wire welds on metal pipe and tanks. Includes Integrated Primer (IP). No Separate Liquid Primer Needed! This economical product is ideal for use in limited access applications. New Handy Cap XL IP now adds the innovative technology of Tapecoat Gray Adhesive to its unique design. The integration of a primer in Tapecoat Gray makes field application of Handy Cap XL IP easier and more economical.

Price: 
$119.60

Handy Cap - 20 per Case

The Tapecoat / Royston Handy Cap™ is a 4" x 4" prefabricated assembly designed for cathodic protection of leads to pipes and tanks. When pressed by hand into position over the anode lead wire weld, it forms a thick, highly resistant electrical insulation seal over the weld, the end of the lead wire and the surrounding area of the pipe or tank. Designed to be used with Royston Roybond 747 Primer.

Price: 
$64.00

Royston SpliceRight - 12 KITS PER CASE

Royston designed the SpliceRight™ system to insulate, waterproof and protect low-voltage electrical connections. It's the splicing kit that keeps your cathodic protection system intact.

SpliceRight's tacky elastomeric insulating compound completely seals and waterproofs the connector area. There's no mixing, heating or pouring. We've developed this compound based on our 50 years of experience in corrosion protection.

The SpliceRight system's resin-impregnated, moisture-cured, fabric bandage can be applied immediately after applying the compound unlike other methods which require hardening time. The bandage provides mechanical protection for the sealant and sets in less than 10 minutes. Quick installation time allows for immediate backfill.

Price: 
$461.76

17 Lb Hi-Potential Magnesium Anode

17 Lb Hi-Potential Magnesium Anode: this anode is packaged with backfill and a 50' #12 THHN Red Solid Lead Wire. 

Add to RFQ

DryConn Visilock® w/SmartGel®

Waterproof and corrosion proof splicing box prefilled with non-toxic sealant. Housing allows splice examination without opening encapsulated splice.

  • Designed to protect cathodic splices from corrosion
  • Waterproof and corrosion proof
  • Pre-filled with a non-toxic gel that eliminates hazmat requirements
  • Re-enterable, semi-transparent, encapsulated splice allows for a visible splice examination
  • Locking mechanism centers splice in box
  • One piece for fast, easy installation
  • Eliminates heat shrinks, primers, tapes and epoxy packs
  • For making tap or branch splices on insulated cables rated up to 100V

 

PRODUCT SPECIFICATIONS & MEASUREMENTS:

Max. Voltage: 100V
Temperature Rating: -40°C - 90°C (194°F)
Measurements: See specificiation sheet for complete product measurements
Wire Range:
    Main: #8 - 1/0 (.363" - .625" O.D.)
    Tap: #12 - #4 (.305" - .443" O.D.)
Amperate not to exceed maximum temperature of the conductor

Price: 
$38.85

Borin Stelth 2 Reference Electrode SRE-007-CUY

Borin Stelth 2 Solid-State Reference Electrode for Buried and Concrete Service
Model SRE-007-CUY Copper-Copper Sulfate (Cu-CuSO4) For direct burial and concrete in chloride-free conditions.

Size: 1.5" (40 mm) diameter x 7" (180 mm) long. Lead Wire: 50' (15 m) or 20' (6 m) of #14 (2.5 mm2) RHH-RHW wire. Stability: ±5 millivolts.
Material: Ceramic with moisture retention membrane.
Working Temperature Range: 32° F to +176° F (0° C to 80° C).
Material Temperature Range: -60° F to +185° F (-51° C to 85° C).

Add to RFQ
Subscribe to Cathodic Protection