- Bridge Products
- Casing Products
- Cathodic Protection
- Class I / DIV.I Lighting
- Coatings and Linings
- CP / Tracer Wire
- Damage Prevention
- Isolation Joints
- Liquid Coatings
- Markers & Test Stations
- Metal Products
- Pipeline Pigs
- Pipe Storage and Transport Products
- Rehabilitation Products
- Rock Shields
- Spray Application
- Tooling
- Valves
Denso Protal 7900HT Cartridges
400ml & 1000ml

Description:
Protal 7900HT is a VOC free,100% solids, 2 part epoxy coating for pipelines operating at higher temperatures. It is a high build liquid coating that is spray applied in one coat in the field or shop. It cures fast to allow quick backfill when applied to hot pipe.
Add to RFQ
Product Manufacturer:
DENSO
Classified by a UN:
Yes
Features
•High build (up to 40 mils in one coat)
•Can be spray or hand applied
•Excellent adhesion
•Service temperature up to 302°F (150°C)
•Very low permeability
•High abrasion resistance
•Safe and environmentally responsible
•Does not shield cathodic protection
Application Instructions
Spray: Prepare surfaces by grit blasting to a clean near white finish, SSC-SP 10/ NACE No. 2. Heat and check temperature of Part "A" Protal Repair Cartiridge to approximately 120°F to 135°F (49°C to 54°C) in a microwave. Convection oven, weld box or other methods (do not overheat and check with a infrared gun). Utilize the Protal Air Cartridge Gun to spray product. A wet on wet spray technique should be used to achieve a minimum thickness of 20 mils. The coating thickness should be measured using a wet film thickness gauge.