- Bridge Products
- Casing Products
- Cathodic Protection
- Class I / DIV.I Lighting
- Coatings and Linings
- CP / Tracer Wire
- Damage Prevention
- Isolation Joints
- Liquid Coatings
- Markers & Test Stations
- Metal Products
- Pipeline Pigs
- Pipe Storage and Transport Products
- Rehabilitation Products
- Rock Shields
- Spray Application
- Tellus Underground Technology
Monti Bristle Blaster - Electric Kits
Removes corrosion, coatings, mill scale and other contaminants without removing healthy material.
The Bristle Blaster System is an innovative bristle blasting process that removes corrosion and generates an anchor profile by using a specially designed rotary bristle tool. This tool consists of hardened wire bristle tips that are bent forward and are dynamically tuned to a hand-held power tool which operates at approximately 2,500 rpm. Most common uses include: Coating removal, Paint removal, Scale removal, Weld cleaning, Surface decontamination, Surface preparation, Texturing Applications, and Corrosion removal.
MONTI TOOLS INC
Classified by a UN:
•Removal of corrosion, mill scale and defunct protective coatings with a surface cleanliness similar to SA 2.5 (NACE No.2/SSPC-SP10 to SA 3 (NACE No.1/SSPC-SP5)
Restores surface to DIN EN ISO 8501-1 / SA 2.5 to SA 3.
•Surface texture / Anchor profile up to 120µm (Rz) / 4.72 mils
Roughness capability from 40- 120µm Rz / 1.57 - 4.72mils . Also in areas where blasting is not permitted. Applies for non-ferrous metals as well.
•Improved integrity of treated surfaces
Generates compressive residual stress along treated surfaces providing crack growth resistance, improved fatigue life, and improved corrosion resistance.
•Negligible heat generation
Surfaces free of thermal damage and/or heat marking.
GREEN surface preparation, does not use/produce hazardous materials. Low energy requirements.
•Simple and Economical
Eliminates the need for complex and costly abrasive blast equipment. Benefits include:
-no recycling costs for contaminated blasting abrasives
-avoidance of major transport costs of the blasting abrasives
-continuous in-service operation due to ergonomic low system vibration