CP / Tracer Wire

HDD-CCS PE45 Directional Drilling Tracer Wire is equal to copper in signal tracing performace for tracer wire applications.  Meets or exceeds all applicable ASTM Specifications and requirements of the National Electrical Code.  

Add to RFQ

The Tapecoat / Royston Handy Cap™ is a 4" x 4" prefabricated assembly designed for cathodic protection of leads to pipes and tanks. When pressed by hand into position over the anode lead wire weld, it forms a thick, highly resistant electrical insulation seal over the weld, the end of the lead wire and the surrounding area of the pipe or tank. Designed to be used with Royston Roybond 747 Primer.


Cathodic Protection Cable (CPC) is used in Cathodic protection systems designed to protect steel, water or fuel pipelines and storage tanks, steel pier piles, ships, offshore platforms and onshore well casings from corrosion. CPC helps make sure your metal lasts as long as possible when exposed to the earth's electrical charge.

CPC typically consists of a stranded copper conductor insulated from the surrounding soil by one of the following:

  • A single layer of High Molecular Weight Polyethylene (HMWPE) insulation which in most applications is 0.110" thick (110 mils).
  • A fluoropolymer insulation, usually 0.020" (20 mils) of Halar (ECTFE) protected by a 0.065" (65 mils) Polyethylene (HMWPE) jacket is typically used where halogen gases such as fluorine, chlorine, bromine etc. are present and concentrated around the anode and the cable. These types of cables are commonly called "Halar" or "Kynar" Cathodic Protection Cables.
Add to RFQ

CU HDPE Tracer Wire is used to conductively locate buried utility lines for the gas, water, sewer, telecommunication and electrical markets.  It is suitable for use for direct burial applications; temperatures not to exceed 75°C/167°F.

Add to RFQ

Copper Clad Steel Tracer Wire is used to conductively locate buried utility lines for the gas, water, sewer, telecommunication, and electrical markets.  It greatly reduces damage and breaks during installations. Equal to copper in signal tracing performance, it simply outperforms copper tracer wire. Designed for open-cut and plow-in installations using 1 wire.

Add to RFQ
Subscribe to CP / Tracer Wire