Tape Wrap Coatings

The Tapecoat® Hand Wrapster is a cold tape hand operated application tool, which can assist the operator in wrapping tape with the proper tension and overlap for piping 4" OD and above.

Price: 
$1,028.17

Tapecoat 20® is a hot-applied 58 mil coal tar tape for ambient temperature below grade application. Tapecoat 20 is designed to protect buried metal surfaces from underground corrosion and electrolysis. These surfaces include coating pipe, girth welds, fittings, couplings, tanks, cable, conduit, and tie rods. Tapecoat 20 is resistant to thermal expansion, impact and abrasion. Tapecoat 20 consists of a specially formulated pliable coal tar coating completely saturated into and bonded to both sides of a high tensile strength fabric. In addition, it has a polyester film adhering to the coating which facilitates unwinding of the roll and acts as an outer wrap providing additional mechanical strength against backfill and soil stress.

Price: 
$354.24

Tapecoat H50 is designed to protect above ground, buried or submerged metal surfaces from corrosion and electrolysis. It is used for coating pipe, pipe joints, fittings, couplings, tanks, pipe type cable, conduit, tie rods, elevator casings and other metal surfaces. Its unique "MAF" film backing has been specially formulated to provide strength that allows it to be pulled tightly around fittings and other irregular shapes with minimal pull back due to memory. Tapecoat H50 Gray is resistant to UV rays, thermal expansion, impact, abrasion and can be applied over a wide range of ambient temperatures.

Price: 
$326.52

Tapecoat H35 Tape is a 35 mil tape designed to protect above ground, buried or submerged metal surfaces from corrosion and electrolysis. It is used for coating pipe, pipe joints, fittings, couplings, tanks, pipe type cable, conduit, tie rods, elevator casings and other metal surfaces. Its unique "MAF" (multipolymer alloy film) backing has been specially formulated to provide strength that allows it to be pulled tightly around fittings and other irregular shapes with minimal pull back due to memory. Appropriate for coating small to moderate size pipe with a single layer; a 50% overlap may be preferred when coating larger diameter pipe. Tapecoat H35 Gray is resistant to UV rays, thermal expansion, impact, abrasion and can be applied over a wide range of ambient temperatures.

Price: 
$336.48

Tapecoat M50 is a 50 Mil Gray polypropylene mesh-backed, cold applied, below grade coating designed to provide superior soil stress resistance to protect against corrosion and electrolysis on metal substrates.  The Tapecoat M50 has an integrated primer in the adhesive which allows for faster application as there is no need to apply a separate primer when application temperatures are above 40°F.  Appropriate for coating small to large diameter pipe, bends and metal structures, Tapecoat M50 is especially well suited for reconditioning field coated pipe and coating pipe in areas with high soil stresses.

Add to RFQ

Tapecoat T-TAPE Gray PE is designed to protect buried or submerged metal surfaces from corrosion and electrolysis. It is used for coating pipe, pipe joints, fittings, couplings, tanks, pipe type cable, conduit, tie rods, elevator casings and other metal surfaces. Its flexible polyethylene film backing has been specially formulated to provide strength that allows it to be pulled tightly around fittings and other irregular shapes with minimal pull-back due to memory. Tapecoat T-TAPE Gray PE is resistant to thermal expansion, impact, abrasion and can be applied over a wide range of ambient temperatures.

Price: 
$199.44

Tapecoat TR Green is 35 mil, cold applied coating designed to provide protection against corrosion and electrolysis on below grade metal substrates. Combined with strong, flexible film backing, Tapecoat TR Green provides a protective coating with cohesive strength and durability that conforms well to irregular shapes.

Tapecoat TR Green has an integrated primer; the primer is in the adhesive. This exclusive formulation allows for faster application as there is no need to apply a separate primer when application temperatures are above 40°F. The Tapecoat TR Green coating system is VOC free when applied without a primer. When used with Tapecoat Omniprime® the coating system will meet even the strictest environmental laws.

Price: 
$196.08

Royston Butyl Moldable Sealant (C125 Tac Tape) is a 125 mil, high temperature, cold applied, dielectric putty. It is designed to be used as a filler material to fill gaps and voids and to contour irregular surfaces, providing a seamless, water tight barrier preventing overwraps from bridging over substrates. The compound serves as an initial protection against corrosion and electrolysis on irregular fittings and hard-to-coat metal substrates. The use of Butyl Moldable Sealant provides a bonded protective coating with exceptional cohesive strength, flexibility and versatility. Royston Butyl Moldable Sealant requires the use of a primer before application.

Price: 
$156.40

 A 35 mil cold applied tape with a flexible plastic backing and an elastomeric adhesive, for ambient temperature below grade application. Greenline Tape has a leading adhesive edge to secure the lap seal and guide in spiral wrap applications.

Price: 
$404.40

Tapecoat CT is a 35 mil cold-applied tape coating with a 7 mil polyethylene film backing and 28 mils of adhesive for ambient temperature below grade application. Appropriate for coating small to moderate size pipe with a single layer; a 50% overlap may be preferred when coating larger diameter pipe.

Price: 
$325.32

Pages

Subscribe to Tape Wrap Coatings