Categories

Heat Shrink

Canusa DDX

The DDX – Directional Drilling Kit is a high performance system designed to protect welded joints on PP, PE and FBE coated pipelines in directional...

Read more

The DDX – Directional Drilling Kit is a high performance system designed to protect welded joints on PP, PE and FBE coated pipelines in directional drilling applications. The DDX system consists of the following key components:

Force-cure epoxy primer applied to steel for maximum corrosion protection. Epoxy primer is only required for 3-layer applications.

Primary sleeve composed of high shear strength adhesive, a protective heat shrinkable HDPE backing, and a pre-attached closure patch.

Sacrificial sleeve incorporated to protect the leading edge of the underlying primary sleeve during pullthrough operation.

In addition to providing effective protection against pull-through forces that occur during the directional drilling operation, Canusa’s DDX is a multi-layer system that provides superior corrosion protection at pipeline weld joints.

Read less

Add to Quote

Canusa GTS-65

The GTS-65 Global Transmission Sleeve by Canusa-CPS provides superior corrosion protection and excellent bonding on pipelines operating up to 65°C. GTS-65 has been designed with...

Read more

The GTS-65 Global Transmission Sleeve by Canusa-CPS provides superior corrosion protection and excellent bonding on pipelines operating up to 65°C. GTS-65 has been designed with a unique adhesive technology that remains “open” longer than traditional adhesives. Also, special surface active agents allow bonding to lower surface energy coatings (such as polypropylene). As a result, lower preheat temperatures are required to attain true adhesive wet-out, and superior bonding to PE, PP and FBE surfaces is achieved.

Read less

Add to Quote

Canusa High Shrink Sleeve

CANUSA-CPS High Shrink Sleeves are superior performance heat shrinkable products designed for corrosion protection of flanges, casings, bell and spigot joints, and other high profile...

Read more

CANUSA-CPS High Shrink Sleeves are superior performance heat shrinkable products designed for corrosion protection of flanges, casings, bell and spigot joints, and other high profile pipeline couplings. High Shrink Sleeves consist of a crosslinked polyolefin backing, coated with a protective heat sensitive adhesive which effectively bonds to steel substrates and common pipeline coatings including polyethylene and fusion bonded epoxy.

Read less

Add to Quote

Canusa K-60

The Canusa K-60 Wraparound Sleeve is designed for corrosion protection of buried and exposed steel pipelines operating up to 60°C (140°F). K60 consists of a...

Read more

The Canusa K-60 Wraparound Sleeve is designed for corrosion protection of buried and exposed steel pipelines operating up to 60°C (140°F). K60 consists of a crosslinked polyolefin backing, coated with a technologically advanced corrosion protective adhesive, which effectively bonds to steel substrates and common pipeline coatings including polyethylene and fusion bonded epoxy.

Read less

Add to Quote

Canusa KLON / KLNN

The KLON and KLNN sleeves are one piece wraparound sleeves designed for corrosion protection of both offshore and onshore steel pipelines. These sleeves are designed...

Read more

The KLON and KLNN sleeves are one piece wraparound sleeves designed for corrosion protection of both offshore and onshore steel pipelines. These sleeves are designed using a High Density polyolefin backing for improved mechanical protection and either a thermoplastic hybrid or a high shear mastic adhesive for easy installation and high corrosion protection.

Read less

Add to Quote

Canusa Tube PLA

CanusaTube™ by Canusa-CPS is a heat shrinkable tubular sleeve designed for corrosion protection of buried and exposed steel pipelines. CanusaTube™ consists of a crosslinked polyolefin...

Read more

CanusaTube™ by Canusa-CPS is a heat shrinkable tubular sleeve designed for corrosion protection of buried and exposed steel pipelines. CanusaTube™ consists of a crosslinked polyolefin backing, coated with a protective heat sensitive adhesive which effectively bonds to steel substrates and common pipeline coatings including polyethylene and fusion bonded epoxy.

Read less

Add to Quote

Canusa Wrapid Tape

CANUSA Wrapid Tape™ consists of a crosslinked polyolefin backing, coated with a protective, heat sensitive anticorrosion adhesive which effectively bonds to steel substrates and common...

Read more

CANUSA Wrapid Tape™ consists of a crosslinked polyolefin backing, coated with a protective, heat sensitive anticorrosion adhesive which effectively bonds to steel substrates and common pipeline coatings including polyethylene and fusion bonded epoxy. Upon the application of heat, Wrapid Tape™ shrinks down to fully encapsulate the protected substrate. The product is packaged in convenient rolls with various widths to protect and repair pipelines, fittings, bends, elbows and other irregular configurations.
CANUSA Wrapid Tape™ is available in either Black or Yellow 2″, 3″ 4″, or 6″ x 50′ lengths.

Read less

Add to Quote

Search

Shopping cart

Cart

Have Questions?

Call 877-373-0118 to speak with a product specialist.

or

Click here to send a message.